(262) 220-7884
Home Networking · Mesh WiFi · Southern Wisconsin

Your whole home, one network. No dead zones. No buffering. No excuses.

Professional home networking for people who actually use their internet. Mesh WiFi, wired ethernet, gaming optimization, and network security — installed, configured, and tested to deliver the speed you're already paying for.

Call (262) 220-7884Get a quote
// Diagnose your own WiFi

Why your WiFi actually sucks.

WiFi problems are almost always one of five things. Before you call, see if the symptom matches one of these — it'll help us scope the fix faster.

I
Router placement
Router is in a basement corner, closet, or tucked behind the TV. Signal has to travel through walls, floors, and furniture to reach you. Radio waves hate all three.
→ Fix: Move router or add mesh node
II
Construction materials
Brick, metal siding, stucco mesh, plaster lath, and certain insulations significantly degrade WiFi. Older homes in Southern Wisconsin often have plaster lath walls that block 5GHz almost completely.
→ Fix: Multi-node mesh with strategic placement
III
Old hardware
Your ISP's 2019 router hasn't kept up. WiFi 6 (802.11ax) and WiFi 6E brought dramatic improvements in capacity, range, and interference handling. If your router is 4+ years old, upgrading alone often solves the problem.
→ Fix: WiFi 6 or 6E router upgrade
IV
Interference from neighbors & devices
Too many WiFi networks on the same channel. Microwaves, baby monitors, Bluetooth, and older cordless phones all interfere with 2.4GHz. Dense neighborhoods amplify this problem.
→ Fix: Channel audit + dual-band config
V
ISP itself
Sometimes the problem isn't your WiFi — it's the connection feeding it. Ping tests, wired speed tests, and historical monitoring reveal whether your ISP is actually delivering what you pay for.
→ Fix: ISP audit + escalation report
// Why professional matters

A mesh system in a box doesn't make your house work.

Anyone can buy an Eero 3-pack from Best Buy. The hard part is where to put each node, which channels to prioritize, how to handle the ISP handoff, and how to set up the roaming so devices don't stick to the wrong node.

Professional install means we do a site survey first. We measure signal, identify dead zones, plan node placement around your home's actual layout, and tune the settings so it works on day one — not after weeks of you moving things around.

Then we leave you with documentation: a map of what's installed, speed test results in every room, and admin access to make changes later if you want. No mystery boxes on the wall.

// Coverage tiers

Four tiers, real pricing.

Pricing based on home size and system complexity. Every tier includes hardware, installation, configuration, full coverage testing, and a post-install documentation package.

01 · Small< 2,000 sq ft

Small home

$299+starting

Apartments, condos, and smaller single-story homes. Usually 1-2 mesh nodes.

  • 1-2 mesh nodes
  • Hardware included
  • ISP handoff config
  • Speed testing
  • Admin handoff
  • 30-day follow-up
02 · Medium2–4k sq ft

Medium home

$599+starting

The typical family home — two stories, basement, maybe a detached garage. 2-3 nodes with careful placement.

  • 2-3 mesh nodes
  • Hardware included
  • IoT network setup
  • Guest WiFi config
  • Smart home prep
  • Room-by-room testing
  • Gaming optimization
03 · Large4,000+ sq ft

Large home

$1,199+starting

Multi-story with finished basement, or sprawling ranch. 3-5 nodes often with wired backhaul.

  • 3-5 mesh nodes
  • Wired backhaul runs
  • Dedicated network rack
  • VLAN segmentation
  • Camera integration
  • Detailed coverage map
  • Priority support
04 · CustomEnterprise-grade

Enterprise home

$2,999+custom quote

Luxury homes, estates, or anyone wanting commercial-grade infrastructure. Ubiquiti UniFi or equivalent.

  • UniFi controller setup
  • Rack & POE switch
  • Fiber backbone option
  • Full network monitoring
  • Structured wiring tie-in
  • Outdoor WAPs included
  • Ongoing management
// Hardware we install

Four platforms, honest tradeoffs.

We're platform-agnostic. Each mesh brand has strengths, and the right choice depends on your home size, how you use the internet, and whether you want to manage it yourself later. Here's an honest comparison.

Eero
Most homes

+ Strengths

  • Simplest setup
  • Rock-solid performance
  • Great app, minimal fiddling
  • Apple-like polish
  • Auto-updates quietly

− Limitations

  • Owned by Amazon
  • Advanced features behind Eero Plus
  • Limited custom control
Best for → Families who want it to just work. Not interested in managing a network long-term.
Ubiquiti
Power users

+ Strengths

  • Commercial-grade hardware
  • Complete network control
  • Excellent scaling
  • No subscription fees
  • Best-in-class outdoor APs

− Limitations

  • Steeper learning curve
  • Requires a controller device
  • Higher upfront cost
Best for → Large homes, tech enthusiasts, anyone who wants real network control.
TP-Link Deco
Best value

+ Strengths

  • Best price per node
  • Strong performance
  • Decent mobile app
  • WiFi 6E models available
  • No forced subscription

− Limitations

  • Less polished than Eero
  • Some firmware inconsistency
  • China-based vendor concerns
Best for → Budget-conscious homes that still want reliable mesh coverage.
Netgear Orbi
Long range

+ Strengths

  • Best single-unit range
  • Dedicated backhaul band
  • Strong signal penetration
  • Enterprise-grade models

− Limitations

  • Expensive per node
  • App is clunky
  • Some features subscription-gated
Best for → Large open-plan homes where fewer-but-bigger nodes make sense.
// Network topology

Wired, wireless, or hybrid?

The question isn't "do I need ethernet?" It's "which combination of wired and wireless makes the most sense for this specific house?" Here's how we decide.

Option A

Pure wireless

Mesh nodes communicate wirelessly to each other. Works well for smaller homes and renters who can't run cables through walls.

Best when → Small-to-medium home, no construction permitted, simple setup priority
Option B

Wired backhaul

Mesh nodes still serve WiFi to devices, but they talk to each other over ethernet. Dramatically faster and more stable than wireless backhaul.

Best when → Medium-to-large home, existing ethernet runs, performance matters
Option C

Full hybrid

Wired ethernet to important endpoints (gaming, home office, media), mesh WiFi everywhere else. Best of both worlds.

Best when → New construction, mixed use cases, enthusiast-level performance
// What done right looks like

Your house, specified.

Every home networking install ends with a before/after spec report. You'll know exactly what changed, room by room, with numbers that don't lie.

  • Speed test in every major room, both wired and WiFi
  • Coverage map showing signal strength room-by-room
  • Node locations diagrammed and labeled
  • Network names and passwords documented
  • Admin credentials handed to you on paper
  • Latency tests to typical gaming/video servers
  • 30-day follow-up call to catch anything that regressed
95%+
ISP speed
in every room
0
Dead zones
after install
4+
Mesh platforms
we install
30day
Post-install
follow-up call

Home networking questions, answered.

Real questions from homeowners scoping out whether to upgrade. If yours isn't here, just call.

(262) 220-7884 →
How much does home WiFi installation cost?
Home WiFi installation runs $299 to $2,999+ depending on home size and system choice. Small homes under 2,000 sq ft typically run $299-$599. Medium homes (2,000-4,000 sq ft) run $599-$1,199. Large homes (4,000+ sq ft) run $1,199-$2,999+. Enterprise-grade systems (Ubiquiti UniFi with dedicated rack) start at $2,999. Every quote includes hardware, installation, configuration, and full coverage testing.
What mesh WiFi system is best for my home?
Depends on your needs. Eero is best for most homes — simple setup, strong mesh performance, minimal ongoing maintenance. Ubiquiti is best for power users and larger homes who want fine control. TP-Link Deco is the best value for small-to-medium homes. Netgear Orbi has the best single-unit range for open-plan layouts. We recommend based on your actual home and use case, not brand preference.
Why does my WiFi have dead zones?
Usually one of five reasons: router placement is wrong (too corner/too low), construction materials block signal (brick, metal, plaster lath common in older Wisconsin homes), distance exceeds single-router range, interference from neighbors or devices, or the router itself is old and weak. A proper mesh system with thoughtful placement solves all five in most homes. If it doesn't, we find and fix the remaining cause.
Do I need wired ethernet or is mesh WiFi enough?
For most homes, mesh WiFi with good placement is sufficient. Wired ethernet is worth it for three scenarios: gaming setups where latency matters, home offices with critical video calls, and mesh nodes themselves (wired backhaul dramatically improves mesh performance). We recommend whichever approach actually solves your problem — not whichever is more expensive.
Can you optimize my home network for gaming?
Yes. Gaming optimization includes wired ethernet to the gaming station, proper QoS (Quality of Service) configuration to prioritize game traffic, low-latency DNS settings, port forwarding for specific titles where needed, and baseline speed/ping testing so you can verify the improvement. Usually adds $149-$299 to any base package. For competitive gamers, this is where investment pays off the most.
What about network security for smart home devices?
Smart home devices (cameras, thermostats, doorbells, TVs) should be on a separate IoT network, not your main WiFi. We configure guest or IoT VLANs on eligible systems (Eero, Ubiquiti, TP-Link Deco XE, Netgear Orbi Pro) to keep smart devices isolated. That way a compromised doorbell or camera can't reach your laptop, phone, or files. Highly recommended for any home with 10+ smart devices.
Do you work with my existing ISP router?
Yes. In most installs we put your ISP's router in 'bridge' or 'passthrough' mode and run your network through a dedicated mesh or router system. That gives you much better performance, control, and security than the ISP's hardware. For ISPs that won't bridge (some cable providers), we work around it — the ISP router stays in its default mode and we configure our system behind it. Either way, the end result is the same for you.
Do you install wired ethernet drops for new construction?
Yes, though for new construction we usually scope that as part of our structured wiring service — running cable during the rough-in phase before drywall goes up. That's the most cost-effective time to add ethernet. For existing homes, we can still run ethernet through walls and attics, just with more care around existing finishes.
// Related residential services

More home IT services.

New construction

Structured wiring

Full low-voltage install for new construction. Ethernet runs, camera pre-wire, smart home infrastructure for builders and GCs.

See structured wiring →
Computer

PC repair

Desktop PC repair for custom builds and prebuilts. Component-level diagnostics, PSU, motherboard, GPU, storage, and more.

See PC repair →
Computer

Laptop repair

Windows, Mac, and Chromebook laptop repair. Screen, battery, keyboard, and data recovery across all platforms.

See laptop repair →

Ready to fix your WiFi?

Free quote based on your home's size and layout. Installation typically happens within 1-2 weeks of quote acceptance. Drop off old hardware or let us dispose of it securely.

Call (262) 220-7884Request a quote →